RE: Conserver 7.1.3 & Netapp Filers

I have a Digi Portserver II connected to my F840.  Stock serial cabling I
had on hand worked for me.

Ernie



> -----Original Message-----
> From: users-admin@conserver.com [mailto:users-admin@conserver.com]On
> Behalf Of Glenn Grimes
> Sent: Wednesday, May 15, 2002 10:31 AM
> To: users@conserver.com
> Subject: Conserver 7.1.3 & Netapp Filers
>
>
> Hi all,
>
> Is anyone out there using conserver to connect to a netapp filer.  I
> have tried all variations of cabling, straight/rolled/crossover, with
> different DB9 connectors, (the conserver server & the filer are a few
> meters apart, set up is Conserver_PC -> Cisco 2620 -> Patch Panel ->
> Patch Panel -> Filer).
>
> Netapp filers in general use a normal DB9 male connector and a rolled
> cable.  I have tried making new DB9 connectors with Pins 2 & 3 swapped
> etc but also with no luck.  I have tried connecting my patching into a
> PC and it is working fine with conserver, I am receiving a signal light
> on the 2620, but when I connect to the filer I do not receive a signal
> back at the Cisco 2620.
>
> Any help would be greatly appreciated.
>
> Rgds,
>
> Glenn
> --
> System & Network Operations
> eircom net
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users
>

smime.p7s