Re: Conserver vs Sun X4100

Hogan, Emmett (LNG-SAC) wrote:
> I am finally getting back around to doing this!
>
> I have one small and one not-so-small problem:
>
> Small problem: I don't know what was in the "ilom" stanza (you have an
> "include ilom" in the "console foo" stanza)

 That isn't needed - just forgot to remove it when cleaning up my example.

> Not-So-Small Problem: I can connect to the service processor just fine:
> =============================================
> Sun(TM) Integrated Lights Out Manager
>
> Version 1.0.5
>
> Copyright 2005 Sun Microsystems, Inc. All rights reserved.
>
> -> start /SP/console
> Are you sure you want to start /SP/console (y/n)? y
>
> Serial console started.  To stop, type ESC (
> =============================================
>
> After this I get nothing...key strokes don't wake it up, nada.  If I hot
> "ESC (" I get the "-> " prompt and can exit just fine.
>
> Did you run into this at all?

 I know this sounds stupid, but are you sure the system itself is on?

 The ILOM itself will be running even if the system itself is not powered on.

 Go back to the ILOM prompt 'ESC (' and do a 'start /SYS'.  By default, the 
system itself does not power on when first plugged in.