RE: Conserver managing Cyclades TS - Connection Reset by Peer

  Just to confirm...

  From the conserver host, you can telnet to the cyclades 
by IP address at port 7000+n, yes? (Just ensuring that 
routes are correct, and the Cyclades is set for reverse-tcp...)

  You are using curly-braces in the conserver.cf file, and
there are no parenthesis masquerading as a bracket? 

  You have semicolons in all of the config lines of the 
conserver.cf file, as seen in the example lines?

    -Zonker-

-----Original Message-----
From: users-bounces@conserver.com [mailto:users-bounces@conserver.com]
On Behalf Of Nathan Straz
Sent: Thursday, July 13, 2006 12:09 PM
To: users@conserver.com
Subject: Conserver managing Cyclades TS - Connection Reset by Peer

I'm having a little trouble with my conserver setup and my Cyclades
TS3000.  I have a Linux server running conserver and I have it talking
to the TS3000 with this config block:

default cyclades-01 {
        type host;
        host cyclades-01;
        portbase 7000;
        portinc 1;
        rw *;
}

My console connections are hanging and I found a ton of these in the
logs:

[Thu Jul 13 13:54:30 2006] conserver (2787): ERROR: FileRead(): fd 9:
Connection reset by peer [Thu Jul 13 13:54:30 2006] conserver (2787):
ERROR: [taft-02] read failure: unexpected EOF [Thu Jul 13 13:54:30 2006]
conserver (2787): [taft-02] automatic reinitialization [Thu Jul 13
14:02:42 2006] conserver (2785): ERROR: FileRead(): fd 35: Connection
reset by peer [Thu Jul 13 14:02:42 2006] conserver (2785): ERROR:
[tank-02] read failure: unexpected EOF [Thu Jul 13 14:02:42 2006]
conserver (2785): [tank-02] automatic reinitialization [Thu Jul 13
14:02:43 2006] conserver (2785): ERROR: FileRead(): fd 33: Connection
reset by peer [Thu Jul 13 14:02:43 2006] conserver (2785): ERROR:
[tank-03] read failure: unexpected EOF [Thu Jul 13 14:02:43 2006]
conserver (2785): [tank-03] automatic reinitialization

I turned off all of the buffering on the Cyclades, but I'm still hitting
this.  I seems like the cyclades can't handle the load from conserver.
I'm running 39 of the 48 ports.

Has anyone run into similar problems?  I'm running the latest firmware
from Cyclades.

Nate
_______________________________________________
users mailing list
users@conserver.com
https://www.conserver.com/mailman/listinfo/users